762 All Aluminum Super Series

762AASuperSeries
You Are Here: .

RMEngineLogo

1,475 Hp/ 1,220 Ft.Lbs.

4.750″ Bore/ 5.375″ Stroke

 

Contact Us for Availability & Pricing

 

To Order or for More Information

CALL TOLL FREE!

855-467-4880

Product Description

Reher-Morrison’s 762ci All Aluminum 5″ bore spacing engine is a Horsepower & Torque MONSTER! Awesome Top Sportsman with Big Reliable Power! This engine will put you up front no matter what or where you race! This 4.750″ bore, 5.375″ stroke engine uses 5.0″ spreadport 14° cylinder heads and takes the performance of the Big Block Chevrolet to the next level. It is track tested and dyno proven to give consistent and reliable, 1,475 Hp and 1,220 Ft/Lbs of torque, round after round. Just ask top racers like Jerry Barker and Mike Bauerly who rely on Reher-Morrison horsepower for winning performance.

NOTE: Tests were performed with NON-OXYGENATED fuel. The use of OXYGENATED fuels (Example: VP113 or Q16) may produce a power increase, but will require a tuning change, including increase in jet size, for optimum performance.

Download PDF: All Aluminum 762ci Engine Specifications Details

Engine Features

  • Donovan 11.300″ Deck Height Aluminum Block
  • Bryant 5.375″ Stroke Custom Crankshaft, Fully Counterweighted
  • MGP Billet Aluminum Rods with 1.031″ Diameter Pin End
  • CP Pistons 4.750″ Bore Custom Gas Ported
  • Diamond Tool Steel Wrist Pins 1.031″ O.D. – .200″ Straight Wall
  • Total Seal Gapless Compression Top, Napier 2nd and 3mm Oil Rings
  • RMRE/Victory Custom Titanium Valves 2,550″ Int/1.900″ Exh
  • PAC 1.645″ O.D. Triple Valve Springs
  • Manley 10° Titanium Retainers
  • Manley 10° Bead Loc Valve Locks
  • T&D Shaft Mounted Rocker Arms 1.90 Int/1.85 Exh Ratios
  • Clark Dead Soft Copper Heads Gaskets
  • ARP 12 Point Head Stud Kit
  • RMRE Billet Rail Sheetmetal Valve Covers
  • RMRE Custom 2×4 Barrel Sheetmetal Fabricated Intake Manifold
  • Manton Pushrods
  • 1250cfm 2×4 Barrel Matched Set Carburetors
  • Comp Cams Custom Ground 60mm Roller Bearing Roller Camshaft
  • Isky .903″ Diameter Red Zone Roller Lifters
  • Clevite 77 “H” Series Performance Rod/Main Bearings
  • Jesel Raised Cam Belt Drive Timing System
  • MSD Crank Trigger Ignition System with MSD Crab Cap Distributor
  • RMRE/Moroso Custom Fully Partitioned Aluminum Dry Sump Oil Pan
  • Dailey 5 Stage Dry Sump Oil Pump w/Hi-Volume HD Pressure Section
  • ATI Internal Balance Super Damper
  • XRP Plumbing with New HS-79 Black Hypalon Hose and Matched Fittings
  • 5.0″ Spreadport 14º Cylinder Heads with Alloy Seats