Product Description

Engine Features

• Brodix +.400″Aluminum Block-Hipped ***
• RMRE Exclusive Design 20° Aluminum Cylinder Heads
• RMRE/Manley Titanium Intake & Exhaust Valves
• Manley 10° Titanium Valve Spring Retainers
• 4340 Callies Magnum Internal Balanced Crankshaft
• GRP Aluminum Rods w/ARP 2000 Bolts
• RMRE Spec Pistons
• RMRE Spec Ring Sets
• RMRE Spec Performance Rod/Main Bearings
• 55mm Roller Cam Bearings
• RMRE Spec Steel Billet 7/4 Swap F.O. Roller Camshaft
• .937″ Isky Red Zone “Centered” Roller Lifters
• Jesel Belt Drive Timing System
• Moroso Crank Trigger Ignition System
• RMRE/Moroso Vacuum Pump Assembly
• ATI Internal Harmonic Damper
• RMRE Logo Valve Covers Sheetmetal/Billet Rail
• RMRE Wet Sump Oiling System w/Billet Oil Pump
• APD Billet Blow Thru Carburetor
• T&D Shaft Mounted Aluminum Roller Rocker Arms 1.70/1.70 w/ Steel Exhaust
• Manton ½ Exhaust Pushrods
• Manley 7/16 Intake Pushrods

ProCharger Side Mount & Front Mount

Available with F-1X and F1X-12R ProCharger, Side mount and Front mount

***HIP is an acronym for Hot Isostatic Pressing, a process that subjects a component to high temperature and high gas pressure simultaneously. Treating a cast-aluminum block with this process actually compresses the aluminum, reducing its porosity and improving its mechanical properties. Cast aluminum that has been through the HIP process has a higher tensile strength and higher yield strength than untreated aluminum.